50-W stereo, 100-W mono, 4.5- to 26-V supply, analog input Class-D audio amplifier w/ SpeakerGuard™

Features for the TPA3116D2

Supports Multiple Output Configurations
2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2)
2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2)
2 × 15 WInto a 8-Ω BTL Load at 15 V (TPA3130D2)

Wide Voltage Range: 4.5 V to 26 V
Efficient Class-D Operation
>90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat SinkSize
Advanced Modulation Schemes
Multiple Switching Frequencies
AM Avoidance
Master and SlaveSynchronization
Up to 1.2-MHz Switching Frequency
Feedback Power-Stage Architecture With High PSRR Reduces PSU Requirements
Programmable Power Limit
Differential and Single-Ended Inputs
Stereo and Mono Mode With Single-Filter Mono Configuration
Single Power Supply Reduces Component Count
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, DC-Detect, and Short Circuit With Error Reporting
Thermally Enhanced Packages
DAD (32-Pin HTSSOP Pad Up)
DAP (32-Pin HTSSOP PadDown)
–40°C to 85°C Ambient Temperature Range

Description for the TPA3116D2

The TPA31xxD2 series are stereo efficient, digital amplifier power stage for drivingspeakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 Wwithout external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω withoutheat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ωwith a small heat-sink attached to its top side PowerPAD. All three devices share the samefootprint enabling a single PCB to be used across different power levels.

The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequencyoption to avoid AM interferences; this is achieved together with an option of either master orslave option, making it possible to synchronize multiple devices.

The TPA31xxD2 devices are fully protected against faults with short-circuit protectionand thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reportedback to the processor to prevent devices from being damaged during overload conditions.

Quality information
RoHS Yes
Lead finish / Ball material Level-3-260C-168 HR
Packaging information
Package | Pins HTSSOP (DAD) | 32
Package qty | Carrier 46 | TUBE
Operating temperature range (°C) -40 to 85

Write a review

Note: HTML is not translated!
    Bad           Good


  • $3.20

Available Options

Tags: TPA3116D2DADR, TPA3116D2, TPA3116D2 datasheet